 FP7500 – The Windpointe™ Five Blade Fan - The Windpointe™ Five Blade series fan. UNI-Packed model with blades.
- 188 x 25 motor with limited lifetime warranty
- 220v motor available
- Blade pitch:18°
- 44" to 52" blade sweep, depending on the blade type
- Accommodates ceiling slope up to 30° (up to 52° with SCB1-52)
- 6" x 1" downrod included, longer length downrods available
- 80" lead wires
- Blade sets included (set of 5)
- Three forward and three reverse speeds
- Reversing switch located on switch cup
- Downlight Adaptable (sold separately)
- Not recommended for damp or wet locations
- Optional controls sold separately: C1, C2, C4, C5, C1-220, C2-220,C3-220, C4-220, C6-220 (The Islander controls are compatible with the Windpointe)
 TLW125B - Islander™ Table Lamp -
Islander™ Lighting Wet Location table lamp with bamboo shade.
Includes:
- Large bamboo shade with protective glass globe
- 8' power cord
.
 ISD - Woven Bamboo Blades - These Woven Bamboo blades are for use with the Americana®, Belleria™, Bourbon Street®, Islander®, Louvre®, Pedestal™, Sandella™, Torrento™ and Tropicana® fans. One set contains 5 blades. Choose from several blade styles and finishes.
Recommended for damp location use.
 B6000 - Fanimation Curved Blades - Set of Five Curved blades.
- For use with most Fanimation fans with “IS” blade holders: Americana®, Belleria®, Bourbon Street®, Islander®, Louvre®, Sandella®, Torrento™, and Windpointe™
- For use in dry locations only.
Note: Blades only. Fan sold separately.
 FP825 - The Air Shadow™ Fan with Five-Light Kit - The Air Shadow™ fan comes with the following features:
- 188 x 18 motor
- Limited lifetime motor warranty
- 43" blade sweep; blades are includes with this fan
- 15" blade pitch
- Three forward and three reverse speeds
- Reverse built into remote control
- Remote control (C28 model) is included
- 1" diameter x 6" downrod is included; longer downrods may be ordered separately
- 80" lead wires
- Ceiling slope to 30 degrees
- 300-watt maximum total wattage
- Included light kit
- Available in Oil-Rubbed Bronze or Pewter finishes
Note: Bulbs and glass shades not included.
 LK23 - Escalade™ Directional Light Kit - Light Kit only - Fan sold separately
This light kit is supplemental to the Escalade™ fan. Includees six 35w, 120V Halogen bulbs. These perimeter lights are built into the arms. Lights operate in two sets of three: every other light works together. Comes in Matte White or Galvanized finish. Shown in Galvanized finish attached to fan unit.
Sold separately from fan.
 FP20 - Brewmaster® Ceiling Fan -
With the Brewmaster® old-fashioned belt-drive fan's design, you get the warm atmosphere of a friendly pub. Great for both residential and commercial use: bars, pubs, retaurants, great rooms, and offices to name a few. And to top it all off, the Brewmaster® fan is shipped in its own slack barrel!
- Ceiling drop is measured from the ceiling to the bottom of the fan.
- 30 feet of belting included.
Note: Blades and motor sold separately.
 FP1320 - Louvre ® Ceiling Fan - The Louvre® fan utilizes contemporary, dynamic, and playful elements in its design. This fan is great for both residential and commercial use: breakfast nooks, trendy cafes, great rooms, hotel lobbies, Florida rooms and loft areas.
- The motor housing rotates with the blades, 220v motor available.
- Several UL Damp Rated finish options available.
- FDK-2100 motor has a limited lifetime warranty.
- Operates in 3 forward and 3 reverse speeds.
- Ceiling slope to 30° (up to 52° with SCB52).
- 20° blade pitch and 80" lead wires.
- Includes a 6" downrod, longer length downrod available.
Note: Blades and accessories (light kits, controls, etc.) sold separately.
 FP240 - Palisade® Ceiling Fan - This unique Palisade® fan carries a "breath of fresh air" into any room. Its great for both residential and commercial use with ceilings 11½ feet or higher: bars and pubs, trendy cafes, great rooms, hotel and office lobbies, restaurants and loft areas. Some finish options are UL Damp approved.
- Features vertical blade rotation.
- Two independently moving FDK-2100 motors with limited lifetime warranty.
- 120v or 220v motors available.
- Uses a ball and bracket hanging system.
- Includes wall control (C3).
- Remote control adaptable with SW24 remote control receiver, and C-24 or C-25 control, sold separately.
- Wired for multiple lighting options (lights can be assembled to the middle or on the ends).
- Motor units are reversible to provide optional airflow directions.
- Ceiling slope to 30° (up to 52° with SCB52).
- 40° blade pitch.
- Two forward and two reverse speeds; reversing switch located on switch cups.
Note: Blades, Extension Pole, and other accessories (light kits, filigree, etc.) not included, sold separately. Extension pole sold separately and is required for installation. Minimum ceiling height of 11¼ feet using a 24 inch extension pole and 18 inch palm or bamboo blade sets.
 B2000 Series - Treventi® Wooden Blades - These carved wood blades are for use with the Treventi™ fan only. One set contains 3 blades. Several blade styles and finishes available.
Not for damp location use.
 FP2700 - The Evanesce ™ - Striking and impressive, the dual fan design of The Evanesce is sure to be the centerpiece of any room. Three downward speeds, and fan heads that pivot independently, let you adjust airflow as needed. Three downward fan speeds, non-reversing. Motors have a 10 year warranty. Includes remote and wall controls. Both hanger canopy mount and hanger eye bolt options available with this fan assembly. Includes hanger canopy assembly, four 8" hanger rods, two 80" chains, two hanger eye bolts, and four "S" hooks. Optional accessories include a variety of shade options and light arm finishes. One to six light arms can be used with or without shades.
Light arms and shades sold separately.
 FP1820 - Sandella® Fan - The Sandella® fan has a traditional and simple design.
- FDK2100 motor with limited lifetime warranty, 220v motor available.
- Operates in 3 fan speeds - forward and reverse.
- Built-in Uplight takes three 40 watt candelabra bulbs.
- Comes with both traditional (set of 5) and wooden (set of 4) blade holders.
- Uses Current "IS" Series Blades or B4000 Series or "BP or BPW" Series Plastic Blades.
- 20° blade pitch.
- Receiver Module in Switch Cup.
- Ceiling slope to 30° (up to 52° with SCB52).
- Includes a 6" downrod (longer lengths available) and 80" lead wires.
- Includes C22 remote and C23 wall controls.
Note: Blades and accessories sold separately.
 The Caruso® Fan Blade Set -
The Caruso® fan blade set.
- 10 blades
- All Weather and Bamboo listed for damp location use
- Palm Leaf blades for dry location use only
 MA25 - Treventi® Fan Motor - The Treventi® fan allows you to assemble your own unique design and build it to fit your creativity.
- Built-in uplight.
- FDK2100 motor with Limited lifetime warranty, 220v motor available.
- 3 fan speeds - forward and reverse.
- Control receiver in switch cup.
- 18° blade pitch.
- Ceiling slope to 30° (up to 52° with SCB52).
- Includes a 7" downrod (longer lengths available) and 80" lead wires.
- Includes both remote and wall controls (C22 and C23).
Note: Motor housing, blades, bulbs, and side light sold separately.
 FP4220 - The Centaurus™ fan -
Like a work of modern art, The Centaurus™ combines shapes, colors and form to create its own visual language.
- Three forward and three reverse speeds
- Three-speed reversing remote control (C20) included.
- 188 x 25 motor with Limited Lifetime Warranty
- 220v motor available
- 60 " blade sweep
- 20° blade pitch
- Built-in downlight requires three 40-watt candelabra bulbs
- 6" downrod included, longer lengths downrods available
- 80" lead wires
- Ceiling slope to 30° (up to 52° with SCB52)
Note: Blades not included; See accessories.
 Punkah™ Blades -
These blades are for use with the Punkah™ fan only. Set includes one blade.
- Natural palm leaf sets (not for damp location use)
- Woven bamboo sets (recommended for damp location)
- Wicker sets (recommended for damp location)
- Plastic woven bamboo sets (recommended for wet location)
- Plastic palm sets (recommended for wet location)
 FP2320 - Escalade ™ Ceiling Fan - This new and improved Escalade™ fan has a new streamlined grill design for even air flow. Along with its simple contemporary design, this fan's comes with a 10 year motor warranty.
- Three non-reversing fan speeds are controled by the C8 wall control and C9 remote control included with the fan.
- Matte White or Galvanized (shown with light kit) finishes.
- Has a 20" diameter housing, 80" lead wires, and 6" downrod.
- UL listed for damp locations.
Note: Light Kit not included - sold separately, please see accessories. Two week lead time for 220 volt models.
 F301 - 3-Light Fitter -
F301 fitter for use with 2¼" glass only.
Some for wet location use, marked as UL Damp next to the finish.
.
 PAD - Palisade ® Blades - These blade sets are made for use with the Palisade® series fan only. Comes in a set of 8 and is available in two sizes: 18"w or 22"w. Some finishes approved for damp location use: - Natural Palm Leaf™ - Dry location only
- Wood blade - Dry location only
- Woven Bamboo - Recommended for Damp location use
- Palm Leaf Plastic blade set - Recommended for Damp location use
- Bamboo Plastic blade set - Recommended for Damp location use
 Fitters -
Choose from several beautifully designed fitters and several finish options. Priced individually.
For use with 2¼" glass only (sold separately).
Damp location approved finishes are noted with UL Damp next to the finish.
All fitters use 3 or 4 (depending on the model) - 60 watt medium base bulbs.
Note: Glass not included.
 FP320 - Islander™ Ceiling Fan - The Islander® fan brings "a touch of the tropics" into any setting. It's great for both residential and commercial use: breakfast nooks, trendy cafes, great rooms, hotel lobbies, Florida rooms, and loft areas. Several finishes options available (some with UL damp rating).
- FDK-2100 motor has a limited lifetime warranty
- 120v or 220v motor available
- 20° blade pitch
- Three forward and three reverse speeds
- 6" downrod included, longer lengths downrods available
- 80" lead wires
- Ceiling slope to 30°(up to 52° with SCB52)
Note: Blade sets and accessories (light kits, glass, fitters, controls, etc.) sold separately.
 FP780 - Punkah ™ Motor -
The Punkah™ motor.
- 5-year limited warranty.
- A single speed motor
- Can be mounted at either end or in the middle of final assembly.
- Includes 2 ft. power cord.
- Available in 220v model.
 FP720 - Punkah ™ Fan Assembly - The Punkah™ fan design creates a feeling of Old-World grace and sophistication.
- Designed to be mounted to the ceiling or wall.
- System length can expand up to 24 feet, placing up to 6 fan blades on one motor.
- Includes one push rod.
- Each fan assembly sold separately.
- One to six fan assemblies can be run on a single motor.
- Note the number of fan assemblies desired when ordering
Note: Blades and motor (FP780) not included, see Required Components. Not to be used in sound sensitive areas.
 FP5620 - The Huxley™ Fan - The Huxley™ Fan - UNI-packed. A brave new look.
- Reversible cherry/walnut finish blades included
- 54” blade sweep
- 188 x 20 motor
- 14° blade pitch
- Three forward and three reverse speeds, reversing switch located on switch cup
- Limited lifetime warranty
- Fan rated for dry locations only
- Minimum 9' ceiling height required
- 6”x 1” downrod included
- Ceiling slope to 30° (up to 52° with SCB1-52)
- 80” lead wires
- Patent Pending
 B4500SN - The Involution™ Blade Set - Set of two 25" Involution blades.
- For use with FP4520 The Involution™ fan.
- For use in dry locations only.
Note: Blades only. Fan sold separately.
|
|
